Normally, the baseline from which the territorial sea is measured is the low-water line along the coast as marked on large-scale charts officially recognized by the coastal state. This is either the low-water mark closest to the shore, or alternatively it may be an unlimited distance from permanently exposed land, provided that some portion of elevations exposed at low tide but covered at high tide (like mud flats) is within 12 nautical miles (22 km; 14 mi) of permanently exposed land.
Nauru's Territorial Sea Baseline was defined using the 1993 topographic map produce by Survey Graphics Pty Ltd of Perth, Western Australia, under the direction of the Ministry of Island Development and Industry. The map is based on UTM Grid Zone 58, which is referred to the World Geodetic System 1972 (WGS 72). The WGS 72 coordinate system was then converted to WGS 84 using transformation parameters tabled on Nauru Maritime Boundaries Technical Report (TR 399).
The Marshall Islands Contiguous Zone was measured from the low water line of the seaward side of the normal baseline (coast), low-water line of the seaward side of the reef fringing the coast and bounding any lagoon waters adjacent to any part of that coast. MarZone delimitation software was used to generate the Contiguous zone using the World Geodetic System 1984 (WGS 84) reference datum as stipulated under the Republic of the Marshall Islands Maritime Zones Declaration Act 2016.
An exclusive economic zone extends from the baseline to a maximum of 200 nautical miles (370.4 km; 230.2 mi), thus it includes the contiguous zone.[3] A coastal nation has control of all economic resources within its exclusive economic zone, including fishing, mining, oil exploration, and any pollution of those resources.
The Nauru Territorial Sea Zone was measured from the low water line of the seaward side of the normal baseline (coast) or the low-water line of the seaward side of the reef fringing the coast. MarZone delimitation software was used to generate territorial sea limit using the World Geodetic System 1984 (WGS 84) reference datum as stipulated under the Nauru Sea Boundaries Act 1997.
The combined Pacific EEZ layer are the layers gathered from gazetted datasets that the Pacific Community (SPC) has received from the project countries. In areas where there are no gazetted datasets provisional layers are being sourced from the Global Marine Regions database (https://www.marineregions.org/).
There are two layers available, he .shp file layer and the .kml layer which are being used by partners and member states in particular FFA for the Regional Fisheries Surveillance Center (RFSC).
Global EEZ layer are the layers gathered from gazetted datasets that the Pacific Community (SPC) has received from the project countries. In areas where there are no gazetted datasets provisional layers are being sourced from the Global Marine Regions database (https://www.marineregions.org/).
There are two layers available, he .shp file layer and the .kml layer which are being used by partners and member states in particular FFA for the Regional Fisheries Surveillance Center (RFSC).
Global EEZ layer are the layers gathered from gazetted datasets that the Pacific Community (SPC) has received from the project countries. In areas where there are no gazetted datasets provisional layers are being sourced from the Global Marine Regions database (https://www.marineregions.org/).
There are two layers available, the .shp file layer and the .kml layer which are being used by partners and member states in particular FFA for the Regional Fisheries Surveillance Center (RFSC).
Global EEZ layer are the layers gathered from gazetted datasets that the Pacific Community (SPC) has received from the project countries. In areas where there are no gazetted datasets provisional layers are being sourced from the Global Marine Regions database (https://www.marineregions.org/).
There are two layers available the .shp file layer and the .kml layer which are being used by partners and member states in particular FFA for the Regional Fisheries Surveillance Center (RFSC).
The amended Code of the Federated States of Micronesia states in section 104 that the exclusive economic zone is contiguous to the territorial sea. The inner boundary of the exclusive economic zone of each island or atoll is the seaward boundary of the territorial sea, and the outer boundary is a line, every point of which is two hundred nautical miles seaward of the nearest point on the baseline.
The Marine Zones (Declaration) Act 2011 repeals the Marine Zones (Declaration) Act 1983. It states that the territorial sea of Kiribati comprises those waters having, as their inner limits, the baseline of Kiribati and, as their outer limits, a line measured seaward from that baseline, every point of which is at a distance of twelve (12) nautical miles from the nearest point of the baseline.
The Code of the Federated States of Micronesia (FSM) was amended to include the Exclusive Economic Zone (EEZ), to increase the size of its Territorial Sea and to be inclusive of the current political status of FSM and other purpose as it deem fit (16 December 1988)
Chapter 1 of Title 18 of the Code of the Federated States of Micronesia, as amended by Public Law No. 19-172 on April 28, 2017 established a Contiguous Zone, comprising those areas of the sea that are beyond and adjacent to the Territorial Sea. The inner boundary of the contiguous zone is the seaward boundary of the Territorial Sea. The outer boundary of the Contiguous Zone is a line, every point of which is not more than 24 M seaward of the nearest point of the baseline as defined in section 101 of this title.
Data obtained from the Millennium Coral Reef Mapping Project, Institute for Marine Remote Sensing, University of South Florida (IMaRS/USF) and Institut de Recherche pour le Développement (IRD/UR 128, Centre de Nouméa).
http://www.imars.usf.edu/MC/output_south_pacific.html
http://www.imars.usf.edu/MC/products/Vanuatu.zip